New MotorSaver Filter

[Newaddict]

No, I couldn't install one because the new era roll bar takes up the only remaining chassis screw hole in the area where one could possibly install a brace.

[TheChad]

What's the model number for the Monster Truck filter?

.. and how is everyone getting them free?

-TheChad

[OverKill]

No, I couldn't install one because the new era roll bar takes up the only remaining chassis screw hole in the area where one could possibly install a brace.

Look where my brace is mounted on my basher. That should work for you even with the role bar.

I honestly think that your filter braeking was a fluke. I have beat the hell out of mine and it hasn't broke there yet.

[Newaddict]

Overkill - Can you post a couple more pics of the brace from different angles. Thanks.

[TheChad]

I just ordered mine! I order the one for my LST2, and one for my Hyper 7. Expensive lil buggers! But I know I use to have one on my On-Road Nitro and it worked GREAT. I almost never had to clean it. Off-road will be a little dirtier, but should still last alot longer than the exposed foam.

I sent em an E-Mail requesting the brackets, hopefully the'll send em to me!

-TheChad

[OverKill]

Overkill - Can you post a couple more pics of the brace from different angles. Thanks.

Thats all I have, sorry.

[full maxx]

yeah like where can I get a motor saver filter for my lst2 with a mach...like the web site does not offer a purchase

[Newaddict]

Overkill: Thanks for those pics. I got the jist of it...now to find me a few parts from my scrap bin to make a filter brace

Full maxx: E-mail motorsaver and tell them that you'd like to test out their filter and they'll send you one for free. Thats how everyone on this thread got one. Tell them which part numbers you want by looking at their site and they should send them to you if the testing promotion is still on. Good luck.

[full maxx]

cool thanks I sent an email earlier asking where to buy...maybe they will send me one free , that would be really cool

[CaptainCrunch]

is this the bad one????



i should of had just went with the RB one

[revoman]

yea thats the bad one

[full maxx]

is this http://www3.towerhobbies.com/cgi-bin/wt ... XVPA2&P=SM the one for the lst2 with the mach...they did not offer a free one but oh well I like what I see on this thread about them

[CaptainCrunch]

yea thats the bad one

whats so bad about it?

[revoman]

the screen in the front likes to come out while driving and the foam will come out and dirt etc will get in the motor

[CaptainCrunch]

oh i see, maybe i can put a rubber band around it

[Tinker]

I like that clip that is on the bottom of Overkill's last post. That looks like it would hold the filter tube to the carb as good as my 3/4" external snap ring and be a lot easier to take off and put on.

[full maxx]

is this http://www3.towerhobbies.com/cgi-bin/wt ... XVPA2&P=SM the one for the lst2 with the mach...they did not offer a free one but oh well I like what I see on this thread about them

[TheChad]

I just ordered mine! I order the one for my LST2, and one for my Hyper 7. Expensive lil buggers! But I know I use to have one on my On-Road Nitro and it worked GREAT. I almost never had to clean it. Off-road will be a little dirtier, but should still last alot longer than the exposed foam.

I sent em an E-Mail requesting the brackets, hopefully the'll send em to me!

-TheChad

Well MotorSaver sent me the brackets and 2 foam replacements Free. I don't know how ya'll got the actual filters for free, I had to order and pay for them from Horizon.

They look nice though...

-TheChad

[full maxx]

so do I need the one for the truggy/buggy or the 1/8 off road monster truck one, for the mach

[full maxx]

well if no one knows...ok

[SublimeJason]

There Both the Same (& Both will fit).....Only diff is the Elbow that Comes on them......(I like the stock LST Elbow better myself)

[full maxx]

cool thanks SJ

[daparrothead]

SJ,
So you said you like the stock lst2 elbow better than the one that comes with the motor-saver? Will the stock elbow work on the LRP spec 3 .28?

[SublimeJason]

Yep & Yep (The elbow's that come on the Motor savers are rubber and the Stock LST ones are Silicon..... Spelling?)

[SublimeJason]

http://www.motorsaverfilters.com/ I See one of my Trucks made the Motor Savers Web Site (And a Link to the Forum)

[airjeff]

Nice. I just put one on my truck last weekend, used the stock elbo and the longest support down to a servo screw. Works great and if it comes off I have more to worry about than the filer.

[airjeff]

Here is a pic of my install. I've got the LRP ZR.30 in my XXL, but it should be the same for most mills. You need to use the longest bracket, otherwise the filter bumps the carb slide when it comes all the way out.

IMAG0034 (Small).jpg

[goingdef]

I have the older style one w/the front screen and the thing is a pain in the a** to get apart to clean so how the hell are they just falling out ,Although I did just pick it up at the lhs about 3weeks ago so maybe they fixed that problem because they still sell them and theres no disclaimer saying warning the front may fall off for no reason

[qns_xxl]

Will the stock XXL air filter elbow work with the New MotorSaver?

If not, which model should I get?

MSF151691 Motor Saver Large 1/8 Scale Off-Road Truggy/Buggy Air Filter

or

Motor Saver Large 1/8 Scale Off-Road Truck Air Filter


Thanks.

[SublimeJason]

The stock one will Work with the MotorSaver Filter......